PlantaeLight

Light for the farming of tomorrow.

Every colour. Every phase. Full control.

!Watts

Watts measure what a lamp burns, not what a plant gets.

Wattage only tells you how much energy a light consumes. Most grow lights can’t be controlled, so a large part of that energy goes into wavelengths and intensity the plant has no use for. You pay for it, the plant ignores it.

FLORIQ emits only the few wavelengths plants actually use, and every one of them is continuously dimmable on its own. The light the plant needs, at the strength it needs – nothing wasted.

Built by light engineers.

Stage and event lighting know-how – now for plants.

Typical grow light compared with FLORIQ
	Typical grow light	FLORIQ
Spectrum	Drawback: One fixed full-spectrum mix	Advantage: Separate colour channels, each dimmable
Control	Drawback: On/off or one dimmer	Advantage: Every channel stepless, phase by phase
Energy	Drawback: Lots of watts in wavelengths plants don’t use	Advantage: Only the wavelengths plants use
Through the season	Drawback: Same light from seedling to harvest	Advantage: A recipe changes the light per growth phase
Engineering	Drawback: Off-the-shelf LED board	Advantage: Designed by light engineers – measured, not guessed

So the light follows the plant, phase by phase:

01Seedling

02Leaf

03Flower

Schematic illustration, not measured values.

?Why

Why it makes the difference.

Every phase wants different light.
Seedling, leaf and flower respond differently to blue, red and far red. With individually dimmable channels every phase gets its own mix.
Only as much light as needed.
Every channel is dimmable. Where less light is enough, you turn it down and power use drops with it.
What grows well, you repeat.
A recipe stores light, day length and phases. What worked once, you start again with one tap.